RESUMO
Polymer-dispersed liquid crystal (PDLC) film is an active smart film penetrating the market due to its unique functionalities. These functional characteristics include switchable tint capabilities, which shield building residents from the sun's harmful ultraviolet (UV) rays, improve energy-saving features, and produce higher cost-efficiency. Although PDLC films are promising in several applications, there is still ambiguity on the performance of PDLC films. Particularly, the sizing effects' (such as film thickness and area) correlation with visible light transmission (VLT), ultraviolet rejection (UVR), infrared rejection (IRR), light intensity, current consumption, and apparent power consumption is not well understood. Therefore, this study investigated the sizing effects of PDLC films, including the thickness effect on VLT, UVR, IRR, light intensity, and area influence on current and apparent power consumptions. The varying applied voltage effect on the light transmittance of the PDLC film was also effectively demonstrated. A 0.1 mm PDLC film was successfully presented as a cost-efficient film with optimal parameters. Consequently, this study paves the way for a clearer understanding of PDLC films (behavior and sizing effects) in implementing economic PDLC films for large-scale adoption in commercial and residential premises.
RESUMO
Filler additive is used to provide superior bonding in rubber matrix to enhance the storage modulus of magnetorheological elastomer (MRE). However, the magneto-induced modulus is reduced as the initial storage modulus increases. Therefore, this paper aims to increase the magneto-induced modulus and maintain the initial storage modulus by combining filler and plasticizer additives. Both types of additives have different functions, where cobalt ferrite (CoFe2O4) is capable of enhancing the maximum storage modulus and silicone oil (SO) reduces the initial storage modulus. Thus, four MRE samples have been fabricated using (a) no additive, (b) CoFe2O4, (c) SO, and (d) a combination of CoFe2O4 and SO. The sample's hardness and magnetic properties were investigated via Durometer Shore A and Vibrating Sample Magnetometer (VSM), respectively. Furthermore, the rheological properties of MRE samples in terms of storage modulus were investigated upon the frequency and magnetic field sweep using a rheometer. The results demonstrated that the storage modulus of the MRE samples has increased with increasing the oscillation frequency from 0.1 to 50 Hz. Interestingly, the combination of additives has produced the largest value of magneto-induced modulus of 0.90 MPa as compared to other samples. Furthermore, their initial storage modulus was in between samples with SO (lowest) and without additive (highest). Therefore, fundamental knowledge in adding the combination of additives can offer solutions for a wide range of stiffness in MR device applications such as vibration and noise control devices, sensing devices, and actuators.
RESUMO
Background: Elderly people with severe finger weakness may need assistive health technology interventions. Finger weakness impedes the elderly in executing activities of daily living such as unbuttoning shirts and opening clothes pegs. While studies have related finger weakness with ageing effects, there appears to be no research that uses an algorithmic problem-solving approach such as the theory of inventive problem-solving (TRIZ) to recommend finger grip assistive technologies that resolve the issue of finger weakness among the elderly. Using TRIZ, this study aims to conceptualise finger grip enhancer designs for elderly people. Methods: Several TRIZ tools such as the cause-and-effect chain (CEC) analysis, engineering contradiction, physical contradiction, and substance-field analysis are used to conceptualise solutions that assist elderly people in their day-to-day pinching activities. Results: Based on the segmentation principle, a finger assistant concept powered by a miniature linear actuator is recommended. Specific product development processes are used to further conceptualise the actuation system. The study concluded that the chosen concept should use a DC motor to actuate fingers through tendon cables triggered by a push start button. Conclusions: Finger pinch degradation worsens the quality of life of the elderly. A finger grip enhancer that assists in day-to-day activities may be an effective option for elderly people, not only for their physical but also their mental well-being in society.
